LaunchPad

MSP-EXP432P401R LaunchPad and MCP9808 digital temperature sensor example

In this example we show how to connect a MCP9808 digital temperature sensor to a MSP-EXP432P401R LaunchPad, the example will use the Energia IDE. I used a MCP9808 module, which you can see below The MCP9808 digital temperature sensor converts temperatures between -20°C and +100°C to a...

MSP-EXP432P401R LaunchPad and HMC5883 Digital Compass example

In this example we show how to connect a HMC5883 Digital Compass IC to a MSP-EXP432P401R LaunchPad, the example will use the Energia IDE. I used a HMC5883 module in this example,.

MSP-EXP432P401R launchpad and BMP180 sensor example

In this example we show how to connect a BMP180 to a MSP-EXP432P401R LaunchPad, the example will use the Energia IDE. I used a BMP180 module, which you can see below The.

LaunchPad MSP430G2553 and an AD Keypad

I purchased this module as part of a microcontroller kit, its an interesting little module as it has 16 buttons but with only 1 I/O line is required, an analog input. You connect this to your LaunchPad MSP430G2553 and read in the value. The concept is straightforward you use...

MSP-EXP430G2 RGB led example

In this example we connect an RGB led to our MSP-EXP430G2 launchpad and flash the red, green and blue colours Here is a module that is good for these type.

MSP430G2 blinky led example

This is a basic 'hello world' example for the MSP430G2 LaunchPad, this example uses the Energia development environment. This is a first example I'll be bringing more examples using this board.

MSP-EXP430G2 LaunchPad

The MSP-EXP430G2 LaunchPad Development Kit is an easy-to-use microcontroller development board for the low-power and low-cost MSP430G2x MCUs. It has on-board emulation for programming and debugging and features a 14/20-pin DIP socket, on-board buttons and LEDs & BoosterPack Plug-in Module pinouts that support a wide...

← Previous 1 2