nucleo

STM32 Nucleo and ADXL337 accelerometer Arduino example

In this article we connect an ADXL337 accelerometer to an STM32 Nucleo, the example was written in the Arduino IDE The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3g....

STM32 Nucleo and Si1145 example using the Arduino IDE

In this article we connect an STM32 Nucleo to an Si1145 sensor - the code is written in the Arduino IDE The Si1145/46/47 is a low-power, reflectance-based, infrared proximity, ultraviolet.

STM32 Nucleo and TMP102 Arduino example

In this article we look at the TMP102 digital sensor and we will connect it up to an STM32 Nucleo - the example code is written in the Arduino IDE.

STM32 Nucleo and MPL3115A2 pressure sensor MBed example

In this example we connect a MPL3115A2 sensor to a STM32 Nucleo and the example will use the MBed compiler The MPL3115A2 is a compact, piezoresistive, absolute pressure sensor with an I2C digital interface. MPL3115A2 has a wide operating range of 20 kPa to 110 kPa,...

VL53L0X and STM32 Nucleo MBed example

In this example we connect a VL53L0X to a STM32 Nucleo The VL53L0X is a new generation Time-of-Flight (ToF) laser-ranging module housed in the smallest package on the market today,.

STM32 Nucleo and CCS911 sensor MBed example

In this example we will connect a CCS811 gas sensor to an STM32 Nucleo and the code example will be written in the MBed compiler, lets look at the sensor.