Arduino Code

BMG160 3-axis angular rate sensor and Arduino example

The BMG160 is an ultra-small, digital 3-axis angular rate sensor with a measurement range up to 2000°/s and a digital resolution of 16 bit for consumer electronics applications. The BMG160 allows low-noise measurement of angular rates in 3 perpendicular axes and is designed for use...

OPT3001 Digital Ambient Light Sensor and Arduino example

The OPT3001 is a sensor that measures the intensity of visible light. The spectral response of the sensor tightly matches the photopic response of the human eye and includes significant.

Using the HS1101 humidity sensor with an Arduino example

The HS1101 humidity sensor is a cost-effective solution for measuring relative humidity within ±5% accuracy. The sensor’s design is based on a unique capacitive cell; therefore, by using simple RC.

Arduino and MMA8653FC accelerometer example

The NXP® MMA8653FC 10-bit accelerometer has industry leading performance in a small DFN package. Packed with embedded functions that include: Flexible user-programmable options and two configurable interrupt pins Overall power savings through inertial wake-up interrupt signals that monitor events and remain in a low-power mode...

Tick Tock Shield temperature example

Here is a picture of the Tick Tock Shield, this shield is ideal for beginners as it has several components such as a buzzer, LDR, LEDs, temperature sensor, buttons and.

TM1637 display example

This is a common anode 4-digit tube display module which uses the TM1637 driver chip; Only 2 connections are required to control the 4-digit 8-segment displays Here is the module.

Esplora TFT example

In this example we need to connect a TFT LCD to our Esplora, here is a picture of the TFT The code is a basic example, simply toggling between 2 background colours Code [codesyntax lang="cpp"] #include <TFT.h> #include <SPI.h>...

Esplora microphone example

Another example for the Esplora, this timw we will be using the on board microphone, again lets refer to a picture of the board This.

Esplora temperature example

This time we will use the on board temperature sensor of the Esplora and send the temperature out via the serial port, opening the serial monitor you will be able.

← Previous 1 2 3 Next →