This is the KY-009 RGB Full color LED SMD Module. This module has a 5050 surface mount RGB LED that can be used to create virtually any colour by varying …
Arduino
-
-
The KY-025 Reed Switch Module is a small electrical switch which operates with an applied magnetic field, the module can be used as proximity sensor. The module has digital and …
-
In this example we will connect 6 LEDs to a Shield Shield for Spark Core and flash them on and off The Photon is a tiny Wi-Fi development kit for …
-
OK we are now going to look at an TSL2561 attached to the STM32 Nucleo and all development will be done on the Arduino IDE – Install STM32 support in the …
-
OK we are now going to look at an TMP175 attached to the STM32 Nucleo and all development will be done on the Arduino IDE – Install STM32 support in the Arduino …
-
OK we are now going to look at an HDC1080 attached to the STM32 Nucleo and all development will be done on the Arduino IDE – Install STM32 support in the Arduino …
-
OK we are now going to look at various sensors attached to the STM32 Nucleo and all development will be done on the Arduino IDE – Install STM32 support in the …
-
Did you know that you can use the ARduino IDE with STM32 boards – this shows how to add the support Install Arduino IDE Download and install Arduino software (IDE) for the …
-
In this example we will connect an LCD4884 Joystick shield to an Arduino, this is a useful reasonably low cost LCD for your projects This shield provides a simple and …
-
The PCF8591 is a single-chip, single‑supply low‑power 8‑bit CMOS data acquisition device with four analog inputs, one analog output and a serial I²C‑bus interface. Three address pins A0, A1 and …
-
This 16-bit I/O expander for the two-line bidirectional bus (I2C) is designed for 2.5-V to 5.5-V VCCoperation. The PCF8575 device provides general-purpose remote I/O expansion for most microcontroller families by …
-
The BMG160 is an ultra-small, digital 3-axis angular rate sensor with a measurement range up to 2000°/s and a digital resolution of 16 bit for consumer electronics applications. The BMG160 …
-
The OPT3001 is a sensor that measures the intensity of visible light. The spectral response of the sensor tightly matches the photopic response of the human eye and includes significant …
-
The NXP® MMA8653FC 10-bit accelerometer has industry leading performance in a small DFN package. Packed with embedded functions that include: Flexible user-programmable options and two configurable interrupt pins Overall power …